upgradenrepair

Error Message: Windows Cannot Find Autorun.exe

View products that this article applies to.

This article was previously published under Q153981

This is an article from Microsoft posted here for your convenience. MSKB article # 153981

SYMPTOMS

When you are viewing drives in My Computer, one or more of the drives may have an incorrect icon associated with it. When you double-click the icon to view the contents of the drive, the following error message may be displayed:

Program Not Found
Windows cannot find Autorun.exe.
This program is needed for opening files of type 'File'.

You are then prompted for the location of the Autorun.exe file.

CAUSE

An Autorun.inf file exists in the root folder of the drive.

RESOLUTION

Delete or rename the Autorun.inf file in the root folder of the affected drive.

MORE INFORMATION

The Autorun.inf file is used with CD-ROMs to automatically run specified programs. When a non-CD-ROM drive contains an Autorun.inf file, AutoPlay is started when you double-click the drive's icon. AutoPlay attempts to load Autorun.exe (which is not present) to read the Autorun.inf file.

If the Autorun.exe file is also present in the root folder, the actions specified in the Autorun.inf file are carried out if possible.

Contact Email: Support@upgradenrepair.com

DISCLAIMER:UpgradeNRepair (UNR), the owner, and any representatives of UpgradeNRepair (UNR) is not liable for any data loss or hardware failure because of the following procedure. The Information provided is a guide to assist the customer with an issue with their system or software. The procedures offered here may or may not harm your files. Even procedures that are not designed to harm files, can harm files, depending on the issue with the system. Because there is too many unknowns, UpgradeNRepair is unable to guarantee the safety of the files. Customer is responsible for their data and their actions. Before following the directions on this page and the pages these links are linked to, any data the customer does not want to lose will have to be saved. Saving the data is the sole responsibility of the customer. Some or all of the following procedures or information may not apply to your situation.