Enter Key doesn't work on install of Windows XP

When you try to install windows XP, the enter key doesn't work. Some computer systems will allow you to boot to the CD-ROM via a one time boot menu by pressing a key on the keyboard during bootup instead of going to the BIOS and changing the boot sequence.

Sometimes, the one time boot menu doesn't work with the Windows XP install. It will boot to the CD with the one time boot menu but the Enter key will not work. In this situation, you will need to boot to the BIOS and change the boot sequence to boot to the CD-ROM first. The Enter key should work using this method.

Also sometimes when you do the one time boot method, you cannot hit the key combination to bring up the one time boot menu too many times. Hitting the key too many times can cause the Enter key not to work.

Contact Email: Support@upgradenrepair.com

DISCLAIMER:UpgradeNRepair (UNR), the owner, and any representatives of UpgradeNRepair (UNR) is not liable for any data loss or hardware failure because of the following procedure. The Information provided is a guide to assist the customer with an issue with their system or software. The procedures offered here may or may not harm your files. Even procedures that are not designed to harm files, can harm files, depending on the issue with the system. Because there is too many unknowns, UpgradeNRepair is unable to guarantee the safety of the files. Customer is responsible for their data and their actions. Before following the directions on this page and the pages these links are linked to, any data the customer does not want to lose will have to be saved. Saving the data is the sole responsibility of the customer. Some or all of the following procedures or information may not apply to your situation.