Integrated network hangs install

Integrated Network hangs install

During the install of the operating system, the onboard network can keep the operating system from installing. It will either give an error or the install will hang.

This doesn't indicate a problem with the onboard network. Disable the onboard network in the BIOS and then try the re-install again. If the install completes then you can turn the onboard network on again.

You will need to consult the manufacturer to find out the procedure of turning it off in the BIOS due to the numerous types of BIOS layouts that are on the computers. You can email me with the information about your system and I can inform you on how to do it.

Contact Email: Support@upgradenrepair.com

DISCLAIMER:UpgradeNRepair (UNR), the owner, and any representatives of UpgradeNRepair (UNR) is not liable for any data loss or hardware failure because of the following procedure. The Information provided is a guide to assist the customer with an issue with their system or software. The procedures offered here may or may not harm your files. Even procedures that are not designed to harm files, can harm files, depending on the issue with the system. Because there is too many unknowns, UpgradeNRepair is unable to guarantee the safety of the files. Customer is responsible for their data and their actions. Before following the directions on this page and the pages these links are linked to, any data the customer does not want to lose will have to be saved. Saving the data is the sole responsibility of the customer. Some or all of the following procedures or information may not apply to your situation.