upgradenrepair

Hauppauge TV has no sound

This is an issue with Hauppauge PVR - 150 but other TV tuners may have the same issue. (the instructions here is for Win2000) To resolve the issue do the following.

Open WinTV2000
Click on Menu
Click on Suite Manager
Highlight the channel that you have no sound on.
Click on Edit
Uncheck the AFT check box
Slide the slider bar slightly to the right or left approximately + or - 7 degrees.
Click on OK
Repeat for each channel you are having issues with.

If you have a different model and having the same issue, this may be the fix for it as well. Check with your manual for instructions on editing the channels.

This fix came from http://www.hauppauge.com

Contact Email: Support@upgradenrepair.com

DISCLAIMER:UpgradeNRepair (UNR), the owner, and any representatives of UpgradeNRepair (UNR) is not liable for any data loss or hardware failure because of the following procedure. The Information provided is a guide to assist the customer with an issue with their system or software. The procedures offered here may or may not harm your files. Even procedures that are not designed to harm files, can harm files, depending on the issue with the system. Because there is too many unknowns, UpgradeNRepair is unable to guarantee the safety of the files. Customer is responsible for their data and their actions. Before following the directions on this page and the pages these links are linked to, any data the customer does not want to lose will have to be saved. Saving the data is the sole responsibility of the customer. Some or all of the following procedures or information may not apply to your situation.